|bit DSP comparison table||bit One HD||bit One||bit Nove||bit Ten D||bit Ten|
|Audio Inputs||Analog inputs (high levels / pre in)||12 high lev. + 6 pre in||8 high lev. + 6 pre in||6 high lev. + 6 pre in||4 high lev. + 4 pre in||4 high lev. + 4 pre in|
|Analog low-level stereo auxiliary input||1||2||1||1||1|
|Optical digital input||2||1||2||1|
|Electric coaxial digital input||1|
|High-level momentary audio interrupt input with system turn on capability (with Phone Mute IN) for use with mobile phone or navigation systems||1||1||1|
|Audio Outputs||Independent analog PRE channels featuring adjustable level||13 IIR – 9 FIR||8||9||5||5|
|Independent digital audio channels through AD Link output (CAT5 STP LAN cable for use with AD Link provided amplifiers)||13 IIR – 9 FIR||8||8|
|Input/Output Controls||USB /B (2.0 / micro USB 2.0 only for bit One HD) connector for PC connection|
|AC Link control bus connectors for DRC / DRC MP / DRC AB and provided amplifiers|
|Remote In/Key mem|
|Remote out with fixed delay or adjustable by PC||adj.||fixed||adj.||adj.||adj.|
|Mute In and Phone Mute controls settable by PC to switch the audio inputs to auxiliary inputs with turn on capability|
|System Configuration||Full range stereo signal derived through automatic summing high level input channels|
|Auto tune with Audison bit Tune|
|Guided procedure that, thanks to a wide range of set names, provides the ability to assign each speakers channel to the bit processor connections and automatically coordinate their functioning|
|In/Out Volume||Reference tone/signal for sensitivity adjusting||CD-DVD||CD-DVD||CD||CD||CD|
|Main input sensitivity adjustement||automatic with PC||automatic with PC||manual||manual||manual|
|Independent level control for each output channel for system fine tuning||-40 ÷ 0 dB||-40 ÷ 0 dB||-40 ÷ 0 dB||-40 ÷ 0 dB||-40 ÷ 0 dB|
|Equalizer||Dynamic equalizer: self-adjusting gain between low and high listening levels|
|Bass Boost||Adjustable parametric pole (±12 dB; 10 ÷ 500 Hz)||Adjustable parametric pole (±12 dB; 10 ÷ 500 Hz)|
|Automatic de-equalization (with supplied Test CD *- DVD – Audio files)||with ‘time delay compensation’|
|Equalizers for each auxiliary inputs||5 pole parametric FFT eq. using FIR filters||31 band (1/3 oct; +/-12dB)|
|Independent graphic equalizers for each output channels||11 pole parametric eq. using IIR filters||31 band (1/3 oct; +/-12dB)||N.9 Parametrics Equalizers: ±12 dB;10 pole;||31 band (1/3 oct; +/-12dB)||31 band (1/3 oct; +/-12dB)|
|5 parametric poles main equalization, FIR type, to “shape” the sound of the entire system according to the user’s personal music preferences|
|Crossover Filter||Filter typology: Hi-pass, Lo-pass, Full Range, Band-pass|
|Cut-off frequency steps||70 (10 Hz to 20 kHz) + direct numeric frequency input||70 (10 Hz to 20 kHz)||68 (20 Hz to 20 kHz)||68 (20 Hz to 20 kHz)||68 (20 Hz to 20 kHz)|
|Filter mode and Cut-off slope||FIR mode with dedicated Firmaware version / Linkwitz -Butterworth -Bessel 6 to 48 dB/Oct.||Linkwitz -Butterworth 6 to 48 dB/Oct.||Linkwitz -Butterworth 6 to 24 dB/Oct.||Linkwitz -Butterworth 6 to 24 dB/Oct.||Linkwitz -Butterworth 6 to 24 dB/Oct.|
|Bandpass filter with asymmetrical slope setting|
|Mute: Selectable for each output (On/Off)|
|Phase: Selectable for each output (0°/180°)|
|Time Alignment||Guided procedure for the speaker distance data entry with an automated calculation of proper delay times for each channel for accurate time alignment set-up|
|Delay||0 ÷ 22 ms||0 ÷ 22 ms||0 ÷ 15 ms||0 ÷ 15 ms||0 ÷ 15 ms|
|DRC / DRC MP / DRC AB||Digital Remote Control (DRC/DRC MP/ DRC AB) supplied with product||(DRC MP)||(DRC)||Optional (DRC AB)||(DRC)||Optional (DRC/DRC MP)|
|Master Volume control, Subwoofer Volume control, Balance control, Fader control; Input selection; memory selection|
|Bass Boost control|
|Dynamic Equalizer On/Off|
|Memory||Available presets separately managed and recalled by the DRC/DRC MP/DRC AB Remote Control||8 (DRC MP)||4||4||2||2|
|bit software||Microsoft Windows (XP, Vista, 7, 8, 10) based software with “Standard” and “Expert” operating modes; minimum screen resolution: 1024 x 600 px|
The personal data you voluntarily provided will be handled using IT and telematic procedures.
ELETTROMEDIA SRL undertakes to make appropriate use of the information in compliance with existing regulations and with the utmost attention and respect for personal data. With regard to this, pursuant to Articles 13 and 14 of the European Regulation No. 679/2016 (GDPR), the Company informs you of what is described below.
Purposes of the processing
Processing your request to receive material and technical and commercial information.
Sending some commercial and marketing-related information regarding events and new products.
Where the information provided to ELETTROMEDIA SRL includes sensitive data (namely data revealing racial or ethnic origins, membership in parties, trade unions religious or philosophical beliefs, religious, philosophical-related associations as well as data which could reveal one’s health status or sexual orientation) it can exclusively be processed with the prior written consent of the user.
In case of communication of sensitive data, the person concerned shall permit the use of it.
Methods of handling and storage
The handling of the data will be carried out automatically and/or manually through ways ensuring the utmost safety and secrecy by specially appointed internal subjects.
The data will be stored for no longer than it is necessary to meet the purposes for which it had previously been gathered and later handled.
ELETTROMEDIA SRL will be appointed of the exact recording of all the data so as to make it correspond to what had been stated by the person concerned as well as updating any notification of amendment by the person concerned.
In short, the data will also be communicated to:
Sphere within the data is communicated and divulged
Your data, which are undergoing processing, won’t be divulged but could be communicated to companies based either in Italy or abroad:
People appointed by our company who have to do with technical and commercial departments and information systems;
Public bodies or private companies for compliance with legal obligations.
Nature of conferment
Although the conferment of data is optional, the refusal to submit your data may make it impossible for your requests to be fulfilled. By compiling and submitting the form, the person concern shall permit consent for the processing of his/her own data in compliance with ways expressed in points a) and b) of heading “Purposes of the processing” of the present data privacy statement.
Exercise of the rights of the interested party
If you so wished, you may exercise your rights in accordance with Articles no. 11 and 12 of GDPR by sending an email to firstname.lastname@example.org or by post at the address indicated below.