bit Powered Solutions
DRC AC enables the primary system control: master volume, sub volume, source select, memory select, global eq.
F2O extension card provides an additional Coaxial SPDIF or a second Toslink SPDIF input.
The Audison B-CON is the only Bluetooth 5.0® player designed for automotive use that has obtained the “Hi-Res audio wireless” certification from JAS (Japan Audio Society). B-CON is the ideal choice for streaming audio from a Hi-Res player (Fioo, Sony Walkman…) and from latest generation Android/Apple mobile devices.
B-CON is compatible with all audio formats and reaches maximum performance with uncompressed BT streaming (max 96kHz / 24bit, only with Android LDAC devices), both playing local files and with Apps that provide Hi-Res streaming (Tidal, Qobuz…)
USE
The C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz).
The conversion allows the integration of the new Hi-Res portable devices equipped with coaxial digital output (75Ω) and smartphones with analog output on 3.5 mm mini Jack (also 4 poles) with Audison processors featuring an optical digital input compatible with the resolution of the signal sent to the C20.
Thanks to its extreme compactness, the C20 can be installed in a hidden position on the dashboard, drastically reducing the length of the cabling between the portable player and the receiving device nullifying in this way any issues with interfacing.
FEATURES
The coaxial digital input is provided with an isolation transformer that improves the balance between the transmitter and the receiver circuit, reducing noise due to EMI electromagnetic interference, which is particularly insidious inside the passenger compartment.
The AUX-IN input is equipped with a pre-amplifier with adjustable gain of 0.1V ÷ 2V for an optimal coupling with each device before the Analog-Digital conversion is performed by a high quality converter at a resolution of 24 bit/48 kHz.
For maximum ease of use in cars, the C2O independently selects the input with priority assigned to the AUX-IN. With the default setting, after 6 seconds of no analog signal, the C2O moves to the coaxial digital input. An internal switch allows for the time before the switch to be set to 9 or 12 seconds.
Provided cable with 8 pairs of labeled wires to connect Forza bit amplifiers bit with the high-level output of OEM sources.
Eight stereo RCAs interconnection to connect Forza bit amplifier with after-market sources with PRE-OUT outputs provided with Forza amplifiers.
Provided cable with eight pairs of labeled cables to connect the speakers to the AF M8.14 bit and AF C8.14 bit.
This Plug&Play T-Harness provides the ability to install an Audison AF bit amplifier on BMW vehicles equipped with RAM module. It is compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.
AFBMW ReAMP 3 allows AF Forza user to:
- Retrieve the OEM source front mid/high, rear mid/high, underseat low-pass and center signals;
- Route the AF bit amplifier outputs to each of the OEM amplifier seven channels: (Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)
- The Plug&Play terminals enable the user to choose which AF bit output to connect to each of the seven channels of the OEM audio system
- It is also possible to bridge the outputs of the AF bit amplifier
- Keep the OEM amplifier on.
The AFBMW ReAMP 3 can also be used with the Audison AP F IN ADP accessory (not included in the box) for full Plug&Play connection to an AP F8.9 bit amplifier.
Application notes:
- Compatibility with RAM module-equipped 676 HiFi audio package and Audison AF bit amplifier
- the use of other products may require modifications and additional connections to the vehicle
- 676 HiFi systems use 2Ω woofers. Do not bridge two channels into a 2Ω load, since protection shutdown or amplifier damage may result. To use bridged channel, the user needs to replace the OEM 2Ω woofers with Audison APBMW S8-4.2 4Ω woofers. Please, make sure to confirm proper bridge wiring.
- Use the Hi-level input configuration #11 (2-way front + rear + center) during the bit Drive Wizard configuration process. This is essential to properly route the input signal to the bit processor section.
- Confirm proper application
- APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable.
6 channels DSP output cable to connect Forza bit amplifier to Forza D amplifier.
Provided control interconnection to control memory selection and remote power-on.
AUDISON FORZA, THE NEXT LEVEL OF OEM INTEGRATION AND TUNING
- More Power
- More Information
- More Control
- More Inputs
- More Speed
- More Tools
- More Capabilities
- More Guidance
- More Flexibility
all in one state-of-the-art platform!
AUDIOPHILE SOUND YOU EXPECT FROM AUDISON
AF M8.14 bit boasts eight high-fidelity amplified channels 90W x 8 @4Ω, 140W x 8 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 280W x 4 @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections!
*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven.
NEXT-GENERATION TUNING CAPABILITIES FOR MAXIMUM CONTROL
Audison’s completely-new bit Drive PC software can analyze, route, and correct the signal in completely new ways – now you can measure, mix, and finally tune the sound with one powerful tool! The new Graphical User Interface simplifies every control and function, integrating acoustic measurement, and ensuring efficient tuning and great sound! The Acoustic RTA is integrated into the equalizer graph, and is compatible with your USB microphone or sound card. The Final EQ function allows final equalization without damaging the delicate left/right frequency relationships. The six processed preamp outputs are in addition to the eight amplified channels, allowing Forza’s DSP section to manage a larger system easily.
ADVANCED OEM INTEGRATION CAPABILITIES
Forza’s eight analog inputs, plus an optical Toslink digital input, support total connectivity even with the most complex OEM systems. If more analog inputs are required, the optional F4IN expansion card adds four additional analog input channels! If a Coaxial SPDIF or a second Toslink SPDIF input is needed, the optional F2O expansion card can be used. Audison’s classic de-EQ process is joined by de-Time and de-Phase capabilities, enabling sound restoration in nearly every OEM system., The electrical signal analysis ensures proper integration and correction for each input and output channel. The built-in universal speaker simulation technology (USS) yields maximum compatibility with any OEM Source, without muting or instability.
AF M8.14 bit includes a set of six high-quality cables supplied with a protective printed strip placed upstream of the Molex connectors to increase the resistance to torsion:
- Pre-In with 8 stereo RCAs interconnection for after-market sources with PRE-OUT outputs
- Speaker-In with 8 pairs of labeled cables for OEM sources with high-level outputs
- Speaker-Out with 8 labeled cables to connect the amplifier to the speakers
- Dsp-Out with 6 labeled cables to connect the amplifier to one or more companion amplifiers
- Forza Control cable with 2 wires for remote power-on and remote out signal, plus 2 wires for functions programmable on bitDrive software.
|
POWER SUPPLY |
|
|
Nominal power supply voltage / fuse: |
11 ÷ 15 VDC / 2 x 30A |
|
Pulse operating voltage: |
6.5 ÷ 17.5 VDC |
|
Idling current: |
1.5 A |
|
Standby current draw: |
1.7 mA |
|
Consumption @ 14.4 VDC, Minimum load impedance (Max Musical Power): |
55 A |
|
Remote IN: |
4 ÷15 VDC (1 mA) |
|
Remote OUT: |
6.5 ÷15 VDC (150 mA) |
|
ART – Automatic Remote Turn on/off from Speaker-In |
1.5 VDC |
|
Efficiency @ rated power (RMS) @14.4 VDC, 1% THD,4Ω, All Channels: |
82% |
|
AMPLIFIER STAGE |
|
|
Distortion – THD+N @ 1 KHz, 4Ω, 70% Rated Power: |
0.05% |
|
Damping factor @ 1 kHz , 4Ω, 2 VRMS: |
100 |
|
Bandwidth @ -3 dB: |
10 Hz ÷ 42 kHz |
|
S/N ratio (A weighted @ 1 V Input, Rated Power) Master Input: |
98.5 dBA |
|
S/N ratio (A weighted @ Rated Power) Optical Input: |
105 dBA |
|
Minimum load impedance: |
8Ch: 2Ω |
|
4Ch – (Bridge 1/2; 3/4; 5/6; 7/8): 4Ω |
|
|
Output Continuous Power (RMS) @14.4 VDC, 1% THD: |
|
|
• 8 Ch @ 4Ω: |
90 W x 8 |
|
• 8 Ch @ 2Ω: |
140 W x 8 |
|
• 4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: |
280 W x 4 |
|
CEA SPECIFICATIONS |
|
|
Output power @ 4Ω, 1% THD+N, 14.4 V: |
90 W x 8 |
|
SN ratio (ref. 1 W output): |
80 dB |
|
INPUTS / OUTPUTS |
|
|
Pre-In (8 Ch): |
0.6 ÷ 6 VRMS (15 kΩ Imp.) |
|
Speaker-In (8 Ch + + additional 4 Ch with optional F4IN card): |
2.2 ÷ 22 VRMS (5 Ω Imp.) |
|
Digital IN: |
1 x Optical S/PDIF; Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card |
|
DSP Preout (6 Ch): |
5V RMS |
|
DIGITAL SIGNAL PROCESSOR |
|
|
Audio DSP and converters: |
Analog Devices ADAU1467 automotive qualified audio processor. Processing @ 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance |
|
Filter type: |
Full / High-Pass / Low-Pass / Band-Pass |
|
Filter mode and slope: |
Linkwitz-Riley @ 12/24/36/48 dB/Oct. |
|
Butterworth @ 6/12/18/24/30/36/42/48 dB/Oct. |
|
|
Bessel @ 6/12/18/24/30/36/42/48 dB/Oct. |
|
|
Chebyshev @ 6/12/18/24/30/36/42/48 dB/Oct. |
|
|
QLP @ 6 dB/Oct. |
|
|
Crossover frequency: |
20 Hz ÷ 20 kHz |
|
Phase control: |
0° / 180°, All-Pass filters |
|
Analog Input Equalizer (20 Hz ÷ 20 kHz): |
12 Biquad + Delay |
|
Output Equalizer: |
Parametric/Graphic Biquad: 15 poles, 20 Hz ÷ 20 kHz |
|
Input and Output Real-Time Audio Monitor: |
RTA |
|
Time Alignment Distance: |
0 ÷ 510 cm / 0 ÷ 200.8 inches |
|
Time Alignment Delay: |
0 ÷ 15 ms |
|
CONTROL CONNECTIONS |
|
|
Audison DRCC port: |
Input for DRCC remote control (Optional) |
|
Audison ADC port: |
Manage other Audison devices that support this standard |
|
Control 1 wire: |
Customizable functions (+ 12 V activated) |
|
Control 2 wire: |
Customizable functions (+ 12 V activated) |
|
GENERAL REQUIREMENTS |
|
|
PC connections: |
Micro USB 1.1 / 2.0 / 3.0 Compatible |
|
Software/ PC requirements: |
Windows 10, Windows 11 (min. res. 1024 x 768 |
|
Ambient operating temperature range: |
0 °C to 55 °C (32 °F to 131 °F) |
|
SIZE / WEIGHT |
|
|
Max size W x H x D (mm/inch): |
240 x 47 x 156 / 9.44 x 1.85 x 6.14 |
|
Weight (kg/lb): |
2.04 / 4.49 |
Enjoy the improved audio performance of the latest generation Audison D-Class technology.
Maximum versatility thanks to the bridging option for each pair of channels.
Forza amplifiers have two independent power supplies: the audio amplifier power supply is loosely regulated, which allows superior dynamic performance. The DSP power supply is stiffly regulated, which maintains DSP microprocessor operation even during lower-voltage transient states (i.e., start/stop operation).
Native DSP working at 24 bit/96 kHz and an extended audio band up to 40 kHz.
Pure digital signal transfer with a resolution up to 24bit/96 kHz.
Quick I/O Configuration speeds up system definition and signal routing.
When connected with Audison B-CON hi-res Bluetooth receiver, this feature manages the Master Volume of the Forza amp thus ensuring full dynamic range signal at the input.
iDatalink Maestro AR native support for a total integration with OEM infotainment.
Equipped with eight analog inputs, to support total connectivity even with the most complex OEM systems.
Electrical Signal Analysis ensures proper integration and correction for each input channel.
Automatically sums and reverses OEM equalization.
Input delay compensation of time-delayed factory outputs prior to signal summing.
Allows left and right inputs to match in phase before tuning, even if OEM phase processing has been used.
Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.
Next-generation bit Drive software platform - developed for this family of products - simplifies every control and function.
14 DSP-processed output channels for a total control.
6 native pre-out channels for maximum versatility.
The acoustic analysis integrates the response graph into the equalizer display ensuring efficient tuning and great sound, compatible with any 24-bit USB microphone.
The electrical analysis integrates the response graph into the input equalizer display, ensuring efficient tuning.
DRC AC enables the primary system control: master volume, sub volume, source select, memory select, global eq.
F2O extension card provides an additional Coaxial SPDIF or a second Toslink SPDIF input.
The Audison B-CON is the only Bluetooth 5.0® player designed for automotive use that has obtained the “Hi-Res audio wireless” certification from JAS (Japan Audio Society). B-CON is the ideal choice for streaming audio from a Hi-Res player (Fioo, Sony Walkman…) and from latest generation Android/Apple mobile devices.
B-CON is compatible with all audio formats and reaches maximum performance with uncompressed BT streaming (max 96kHz / 24bit, only with Android LDAC devices), both playing local files and with Apps that provide Hi-Res streaming (Tidal, Qobuz…)
USE
The C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz).
The conversion allows the integration of the new Hi-Res portable devices equipped with coaxial digital output (75Ω) and smartphones with analog output on 3.5 mm mini Jack (also 4 poles) with Audison processors featuring an optical digital input compatible with the resolution of the signal sent to the C20.
Thanks to its extreme compactness, the C20 can be installed in a hidden position on the dashboard, drastically reducing the length of the cabling between the portable player and the receiving device nullifying in this way any issues with interfacing.
FEATURES
The coaxial digital input is provided with an isolation transformer that improves the balance between the transmitter and the receiver circuit, reducing noise due to EMI electromagnetic interference, which is particularly insidious inside the passenger compartment.
The AUX-IN input is equipped with a pre-amplifier with adjustable gain of 0.1V ÷ 2V for an optimal coupling with each device before the Analog-Digital conversion is performed by a high quality converter at a resolution of 24 bit/48 kHz.
For maximum ease of use in cars, the C2O independently selects the input with priority assigned to the AUX-IN. With the default setting, after 6 seconds of no analog signal, the C2O moves to the coaxial digital input. An internal switch allows for the time before the switch to be set to 9 or 12 seconds.
Provided cable with 8 pairs of labeled wires to connect Forza bit amplifiers bit with the high-level output of OEM sources.
Eight stereo RCAs interconnection to connect Forza bit amplifier with after-market sources with PRE-OUT outputs provided with Forza amplifiers.
Provided cable with eight pairs of labeled cables to connect the speakers to the AF M8.14 bit and AF C8.14 bit.
This Plug&Play T-Harness provides the ability to install an Audison AF bit amplifier on BMW vehicles equipped with RAM module. It is compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.
AFBMW ReAMP 3 allows AF Forza user to:
- Retrieve the OEM source front mid/high, rear mid/high, underseat low-pass and center signals;
- Route the AF bit amplifier outputs to each of the OEM amplifier seven channels: (Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)
- The Plug&Play terminals enable the user to choose which AF bit output to connect to each of the seven channels of the OEM audio system
- It is also possible to bridge the outputs of the AF bit amplifier
- Keep the OEM amplifier on.
The AFBMW ReAMP 3 can also be used with the Audison AP F IN ADP accessory (not included in the box) for full Plug&Play connection to an AP F8.9 bit amplifier.
Application notes:
- Compatibility with RAM module-equipped 676 HiFi audio package and Audison AF bit amplifier
- the use of other products may require modifications and additional connections to the vehicle
- 676 HiFi systems use 2Ω woofers. Do not bridge two channels into a 2Ω load, since protection shutdown or amplifier damage may result. To use bridged channel, the user needs to replace the OEM 2Ω woofers with Audison APBMW S8-4.2 4Ω woofers. Please, make sure to confirm proper bridge wiring.
- Use the Hi-level input configuration #11 (2-way front + rear + center) during the bit Drive Wizard configuration process. This is essential to properly route the input signal to the bit processor section.
- Confirm proper application
- APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable.
6 channels DSP output cable to connect Forza bit amplifier to Forza D amplifier.
Provided control interconnection to control memory selection and remote power-on.
